\begin{Verbatim}[commandchars=\\\{\}]
Main Menu:
==========
  b) Boot from flash
  g) Download and run from RAM
  d) Download and save to flash
  e) Erase flash sector
  m) Set mode
  s) Store bootloader parameters to flash
  i) Re\PYZhy{}init ethernet
  p) Print flash partition map
  r) Read memory
  w) Write memory
  j) Jump to arbitrary address
  z) Reset

TFTP Get Selected
Board TFTP Server IP Address [0.0.0.0]:  192.168.1.26
Enter filename []: openwrtinitramfs.bin


Destination: a5f00000

Destination: a5f00000
Starting TFTP of openwrtinitramfs.bin from 192.168.1.26
Getting openwrtinitramfs.bin using octet mode
.........................................................................................................................................................................
Enet link up: 1G full
.........................................................................................................................................................................
Tftp complete
Received 9198140 bytes
Image 3 Program Header:
   Signature: a0ff
     Control: 0005
   Major Rev: 0003
   Minor Rev: 0000
  Build Time: 2026/7/30 07:35:26 Z
 File Length: 9198048 bytes
Load Address: 80010000
    Filename: openwrt\PYZhy{}bmips\PYZhy{}bcm3383\PYZhy{}netgear\PYZus{}cg3000\PYZhy{}2staus\PYZhy{}ini
         HCS: 969f
         CRC: 09cfdddc

WARNING: Signatures do not match!  This may be a bad image!
Image sig = a0ff, chip sig = a0d3

Store parameters to flash? [n] 
\end{Verbatim}